02-12-2023, 02:51 PM
(02-12-2023, 02:17 PM)MassDebater Wrote:Righto - ta!(02-12-2023, 02:12 PM)hudds Wrote:(02-12-2023, 02:07 PM)MassDebater Wrote:Er... ta.(02-12-2023, 01:54 PM)hudds Wrote: I didn't know there is a Windows 11. Or an SSD.
This SSD thingy - is it easy to install and get working or do I need techie experience to transfer stuff from the disk thingy?
older SSDs are mostly SATA devices... Unless you've a laptop in which case it will depend on your laptop, and some may not have room to have one put in, which is another reason I hate laptops! In a desktop pc pop the case off, and attach the 2 cables (you can't even put them in the wrong way), attach it to a mounting plate / bracket / whatever is in your case (using standard small screws) and that's it, the newer ones are even simpler they just push and click into place.
Fastest old Hard Drives used to spin at about 7200rpm and transfer around 80-160mbs, cheap SSDs I would expect to start around the 500mbs mark. Slightly more expensive ones can go anywhere from 3000 mbs up to 7500mbs (give or take). I put one in my PS5 as additional storage (a job that takes under 5 minutes) and that does 7500mbs, and was about £100... The faster it goes, generally the faster you go (Windows booting, applications loading, and in some cases applications will run better as well, e.g. Photoshop with its cache folder on the SSD will perform smoother.
This would speed up any old desktop(currently using Hard Drives) that could take it, £47. Off something like this I'd expect Windows 10 to boot in about 30ish seconds.
N.B. if you want to clone your current drive then there is more to the process, but from scratch, or to use it for storage / apps the above will do...
I have a PC (tower thingy) and money is no object for buying the best thing so what would you recommend and make please and for the simplest attaching? I don't game or have many pictures - really just for work. Cheers.
You'll need to check your motherboard, as that will decide what you can attach...
Click on the start button, then click Settings and then click System Information... in the thingy that appears it should tell you loads of blurb, the thing you're looking for is probably listed as Baseboard product... once that is known then it's a case of looking it up and finding out what bits n bobs can be plugged in...
hopefully it's fairly new and will allow an NVME SSD to be added, if it's older it should still take a SATA one. (the NVME are lots faster)

